Series SUBXWD incremental 1000m (1km) submersible solid shaft encoder | Hohner Vietnam | Pitesco Vietnam

[giaban]Liên hệ[/giaban]

[hinhanh]

  [/hinhanh] [tomtat] Giá: Liên hệ
Xuất xứ: Italia
Bảo hành: 12 tháng
[/tomtat]

[kythuat]

Liên hệ cho chúng tôi theo số 0972 064 954 để CÓ thông tin mà Quý khách CẦN.  

- Mr Mai Nghĩa -

< Sales  Engineer>
Email : nghia.pitesco@gmail.com 
Yahoo :  nghia.pitesco
Skype :   nghia.pitesco
web: pitesvietnam.com

---

Series SUBXWD incremental 1000m (1km) submersible solid shaft encoder

---

Stainless Steel SUBSWD (72mm Ø) shown

S U B X W D - K1 - 13 X X - X X X X | | | Resolution Encoder Size | | *M = 46mm Ø | | S = 72mm Ø | | L = 90mm Ø | | Connection  -------------    | *2 = 5m direct cable | *3 = 10m direct cable *5 = 20m direct cable | M = MacArtney 8 pin Exit MCBH8MSS Connector  T = Radial Stainless Steel Connector Data Sheet C = Axial Stainless Steel Cable Data Sheet For cable attached to female mating connector, specify the length of cable to be attached to the mating connector side on a separate line on the PO *Miniature is NOT certified intrinsically safe and only has axial connector *Direct cable is only suitable for 25m depth

---

Technical Data			Connection Options
Operating temp:	- 20 ...+   60 degrees C			MacArtney 8 pin	Direct Cable
	-   4 ...+ 140 degrees F		PS GND	1	Black
Max frequency:	150 kHz		PS 5 ... 24 V	2	Red
Weight:	1 Kg to 6Kg		Output A	3	White
Protection:	IP 68M		Output B	4	Blue
Housing:	St. Steel		Output O	5	Green
Shaft:	Stainless Steel		Output A inv	6	Brown
Bearings:	2 x 6807 ZZ		Output B inv	7	Orange
Torque:	0.8 oz/in (6 N-cm)		Output O inv	8	Yellow
Shaft load:	Supports its own weight
Humidity:	Underwater		Output
Speed:	600 RPM		Diagram is shown with clockwise shaft rotation viewed from
Max. ppr	5000		shaft end

---

Certifications

To use the encoder in a hazardous area, a safety barrier or galvanic isolator has to be used.  Our six channel barrier and isolator work with our encoders.  Barrier Data Sheet     Isolator Data Sheet

IP68M 1000m [Certificate]

UL [Certificate]

ATEX  [Certificate]

IECEx  [Certificate]

Mounting Instructions

Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.

Dimensions of the 90 mm diameter version (Large)

Dimensions of the 72 mm diameter version (Small) Dimensions of the 46 mm diameter version (Miniature)

[/kythuat]

[mota]

Standard
30		Medium Duty Standard Encoder Standard Version
INHO		58 mm Standard Encoder Standard Version          Intrinsically Safe Version
N20		2" (H20 Equivalent Square and Round) US Standard NAMUR (Standard) Output Version         5...24V Line Driver Version
INSQ		2.5" Square American Standard Encoder Standard Version
NAMYQX		2.5" US Standard Heavy Duty IP66 Encoders NAMUR (Standard) Output Version         5...24V Line Driver Version
IN / IP30		90 mm Standard Heavy Duty Encoder Standard Version          Intrinsically Safe Version
Special
DXE & DXL		90 mm Exd IP66 'Extreme' Encoder (functional at -40 degrees optional) Standard Version (DXE)         -40 Degree Version (DXL)
RXE & RXL		72 mm Exd IP66 Encoder (functional at -40 degrees optional) Standard Version (RXE)         -40 Degree Version (RXL)
H (Italy)		58 mm Extremely High Resolution Encoder (up to 90,000 pulses) Standard Version
SUBXWD		Submersible Encoder rated to 1000m (3000ft) (100 bar) depth Standard Version

[/mota]